Condensation with MVHR: what to check before blaming the system
Filters, boost controls and cold surfaces all warrant attention before assuming a running ventilation system is faulty.
Condensation on windows does not necessarily mean a mechanical ventilation with heat recovery system has failed. Household moisture, airflow and the temperature of surfaces all determine where water collects, so increasing the fan speed may not address the cause.
For homes with MVHR, the useful first step is to establish whether ventilation is restricted, moisture production has increased or particular surfaces are becoming too cold.
Check maintenance and controls
Look for warnings on the controller and consult the filter maintenance instructions. If filters need replacing, match them to the unit’s complete model number, dimensions and specification. Follow the manual when opening the equipment, and investigate recurring warnings rather than simply clearing them.
Filters capture airborne particles and help protect the system; they do not absorb household moisture. Replacing a blocked filter may remove an airflow restriction, but it cannot remedy every cause of condensation.
Check how the boost function operates, too. MVHR generally provides continuous background ventilation, with increased extraction available for periods of greater demand. Depending on the installation, boost may use a manual switch, a timer or humidity sensors.
Follow the operating instructions during showers, cooking and other moisture-producing activities. Do not assume the system responds automatically, or that turning off a bathroom light ends its ventilation cycle. Avoid altering installer settings or closing room valves to divert air elsewhere. If the controls are unclear or boost appears ineffective, ask the installer to explain the arrangement.
Consider changes in household moisture
Several showers in quick succession, more people using a bathroom or washing left to dry indoors overnight can change the amount of water vapour the system must remove.
Think about what changed before the condensation began. Moving laundry indoors as the weather cools, for example, may alter the pattern. Saucepan lids and a considered choice of drying space can reduce moisture at source, but persistent damp should not be dismissed as a housekeeping problem.
Identify the cold surfaces
Condensation forms when moist air meets a surface cold enough for water vapour to turn into liquid. That is why one window or external corner may be wet while nearby surfaces remain dry.
Intermittent heating can leave rooms with colder surfaces. Gaps in insulation and thermal bridges can also create local cold spots. Ventilation can help control moisture, but cannot fix a construction defect.
The position of the water matters. Condensation on the room-facing side of a window is different from mist trapped between the panes of a sealed glazing unit. Moisture between panes calls for a glazing assessment, not replacement ventilation filters.
Know when to seek an assessment
A mirror that briefly mists after a shower is different from windows that remain wet for hours, recurring mould or a persistently damp wall. Record where and when moisture appears, including any connection with rainfall or household activities.
A ventilation specialist can assess system performance. A suitable building professional can investigate leaks, cold spots and other moisture sources. Some homes may need both assessments to establish what is causing the problem.